Eye Wash and Drench Hose Unit - Bench Mounted

Dual purpose eyewash/drench hose for deck mounting.
 

• Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the deck flange for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
• Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
• Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
• Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
• Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.
• Supply: 3/8″ NPT male swivel-type inlet.
• Sign: ANSI-compliant identification sign.
• Quality Assurance: Unit is completely assembled and water tested prior to shipment.

The following downloads are available

G5022 Eye Wash and Drench Hose Unit - Bench Mounted Data Sheet

AS4775-2007 Compliance Checklist

Corrosion Guide

A full range of parts and installation support is available nationwide.

Not what you are looking for? Please give us a call on 0800 080 4657 or email us on [email protected]. We are here to help.